PROLINE TRAILERS Tandem Axle Model PBC16, Skid Steer Special   The finest 6 ton capacity Pan Type Trailer money can buy! starting at $4350.00   Specifications GVWR: 14,080 lbs Empty Weight: 2,100 lbs Payload: 12,000 lbs, w/adequate hitch load Deck: 16' flat, 83" wide, 22 3/4" high Ramps: 15" x 5', adjustable to 26" apart Hitch: 2 1/2" Pintle, adjustable 14" to 22" Axles: 2 of 6,000 pound EZ Lube Brake Axles Tie Downs: 6 of 5/8" x 4" Forged D-rings Suspension: 5 leaf springs Breakaway: Gel battery w/charger & charge status LED Indicator Lights Brakes: Electric, 12" x 2" Wheels: 16" x 6" 8-bolt Tires: ST235/80R 16" LRE 3520# Jack: 7,000# drop leg Main Frame: 6" Channel @ 8.2# per foot Crossmembers: 3" Channel 19" on center Decking: 2" nominal Treated Pine Toolbox: Lockable, in Tongue Lights: LED, Rubber Mounted Wiring: 3 pc. Sealed Modular Harness Safety Chains: 2 of 15,000 pound with Clevis Load Angle: 18 degrees Options * 18' Load Deck * 2 5/16" Ball Hitch * Spare Tire/Wheel * (Specifications Subject to Change Without Notice) Drop axles for low deck height, LED lights standard Adjustable Hitch, Lockable Toolbox, Drop Leg Jack ProLine PBC16 6 Ton Capacity Trailer Features & Benefits 1. Our tire weight ratings added together equal the GVWR of the trailer. Most others don't. It's the law! If caught, you'll be fined, and/or shut down till the tires are replaced.  2. LED lights: twice as bright for safety, instant on for improved stopping distance, negligible current draw, guaranteed for life. 3. True 12,000# weight carrying capacity: GVWR 14,080#, can be down rated to 9950#. 4. 5' Ramps: eliminates need for dovetail that reduces useable deck space, low center of gravity carries loads safely. 5. Modular 3 pc. wiring harness: no more bad connections, electrical shorts, or water/salt damage, harness is easily replaced with no tools, buying only the portion that's needed. 6. 83" between fenders: accommodates skid loaders with tracks & other wide loads. 7. Safety breakaway box with battery charger & LED readout: charger eliminates dead batter, ($100 Fine), push button readout shows charge status of battery.  8. Adjustable Hitch: Pintle standard (much safer than ball), ball optional.  9. 7000# Jack with dropleg foot: Jack is bolted, not welded, to trailer frame for easy replacement. 10. Tail lights mounted on back of fender: eliminates damage from rear frame mounting. 11. Each safety chain rated for full GVWR of trailer per DOT specifications. 12. Rub rails and stake pockets for convenient tie down points. 13. Ramp bar supports: a positive ramp holder compared to chains, ramps do not encroach into load area, bars are short to prevent damage if trailer is moved with bars down. 14. Decks secured with bolts: easily removed to change flooring compared to self tapping floor screws that usually wring off. 15. Heavy diamond checker plate fenders, much harder to damage than sheet metal. 16. Lights mounted in frame with shock resistant grommets: less susceptible to damage than surface mounted lights. 17. Brakes on all wheels per Federal Law: 1 axle brakes cause premature failure of truck brakes. 18. Owners manual & Parts list mounted on trailer. 19. Local manufacturer: local service, 3 year warranty, all warranty work done at factory. 20. Treated floor: 2" Pine, treatment resists rot. Be an Informed Consumer!